2021 SISE Virtual Conference Tentaitve Program
(as of September 18, 2021)

*All times indicated below are based on Eastern Daylight Time (EDT) UTC - 4

THURSDAY SEPTEMBER 23, 2021

TIMINGS**

PRESENTATION DETAILS

09:00 - 09:15

SISE 2021 Virtual Conference Welcome Session

09:15 - 10:00

Keynote Speech: "Lessons Learned and Giving Back"

Keynote Speaker: Dr. Steve Henderson

Chief Data Science Officer, Digital Lantern

10:00 - 10:10

SISE 2022 ANNOUNCEMENT By Michael Kempf (Germany)

10:10 - 10:20

BREAK

SESSION A

10:20 - 10:40

Risks and Mitigation Actions in Automated Disassembly of Traction Batteries

-O. Mannuss (Germany)

10:40 - 11:00

Approach for a Systematic Assessment of Electrical Risks During Disassembly of Traction Batteries

-I. Borchardt and S. Finkbeiner (Germany)

11:00 - 11:20

Road Mapping the Future of Counter-Drone Technology

-C. Vincent, V. Mittal, and R. Morales (United States)

11:20 - 11:40

Monte Carlo Simulation in R

-P. Evangelista (United States)

11:40 - 12:00

Streamlining Success: Modeling the Efficiency of the Special Forces Qualification Course

-C. Cerda, F. Rose Jr., B. Knill, J. Liu, E. Taber, and J. Eaton (United States)

12:00 - 1:00

LUNCH

SESSION A

SESSION B

1:00 - 1:20

The Impact of Passive Shoulder Exoskeletons on Muscle Activity During Simulated Aircraft Manufacturing Squeeze Riveting Tasks

-M. J. Jorgensen, N. A. Hakansson, and J. Desai (United States)

Spin the Wheel of (Mis)fortune in Space

-Z. M. Smith (United States)

1:20 - 1:40

An Overview of Safety and Health Issues and Concerns Associated with the COVID-19 Pandemic in the Construction Sector

-S. Choi and J. Staley (United States)

Development of a Mixed Model Conveyor System Using a Simulation Based Lean Six-Sigma Approach for Assembly of Servers

-R. Rout, S. Patra, S. Mashaareh, D. L. Santos, C. M. Greene, G. Pandiarajan, and K. Srihari (United States)

1:40 - 2:00

A Two-Stage Deep Reinforcement Learning Framework for Solving Large Capacitated Vehicle Routing Problems

-A. Arishi, K. Krishnan, and V. Maru (United States)

Contactless PCB Thickness Measurement

-R. Muralidharan, B. DeKelaita, R. Eshraghi, and D. Santos (United States)

2:00 - 2:20

Using A Safety Climate Inventory as a Management Training Tool in Safety: A Case Study

-B. F. Miller, M. Bryant, A. H. Dorame, and M. Tsai (United States)

Digital Engineering Transformation of Requirements Analysis within Model-Based Systems Engineering

-A. R. Miller and D. R. Herber (United States)

2:20 - 2:40

BREAK

SESSION A

SESSION B

2:40 - 3:00

Improving Customer Care Service via Phone Calls to Reduce Customer Wait Time Using ARENA Simulation

-N. L. Gawas, R. Shengale, and S. H. Chung (United States)

Description of the State of Sustainability in Industry 4.0: Practices of High-Tech Plants in Ciudad Juarez

-C. Argüelles, V. Torres, and J. Hernández (Mexico)

3:00 - 3:20

Systematic Review of Alternative Interventions For Construction Workers To Manage Work-Related Musculoskeletal Pain and Discomfort

-I. Rodriguez, G. Ibarra-Mejia, J. Concha, and C. Valencia (United States)

The Walking Map: A Novel Heuristic for Storage Location Assignment in Warehouse Operations

-M. Nikfar, S. Mohammadi, K. G. Nodooshan, and M. Ansari (United States)

3:20 - 3:40

Exploratory Study of 3D Printed Homes: How It Disrupts the Residential Construction Industry

-M. Shook, S. Rogers, and S. Varol (United States)

Six Sigma Projects Work Teams: A Literature Review of the Factors Influencing Their Effectiveness

-M. Alvarez, A. Valles, and S. Noriega (Mexico)

3:40 - 4:00

Generative Adversarial Networks Applied to Brain Signals to Control Cyber-Physical Systems

-P. Rodríguez, J. Mejía, and C. Ochoa (Mexico)

Integrating Lean Six Sigma and Design Thinking for a Superior Customer Experience

-M. V. Testani and K. Patil (United States)

4:00 - 4:20

Psychoacoustic Analysis of Reverberation in an Open-Plan Office to Identify Speech Volume Levels Based on ISO 3382-3

-M. P. Serrano-Ruiz, J. A. Yarza-Acuña, and G. Ibarra-Mejía (Mexico)


FRIDAY SEPTEMBER 24, 2021

SESSION A

SESSION B

09:00 - 09:20

Multi-Agent Evacuation System for Building Fires

-Y. Shirai and H. Ono (Japan)

Assessing Incoming Inspection Performance Using System Dynamics Modelling

-Z. Ocak (Turkey)

09:20 - 09:40

COVID-19 Vaccine Cold Chain Research: A Bibliometric Analysis

-S. Reong and H. M. Wee (Indonesia)

Measuring Emotional Intelligence in Undergraduate Engineering Students

-J. D. García-Santiago and M. I. Méndez-Piñero (Puerto Rico)

09:40 - 10:00

Exploring Alternative Credentials for the Industrial Engineer

-M. A. Martínez, N. M. Leal, D. C. Bacre, J. A. Chi, A. A. Cavazos, A. T. Botello, and J. O. Rodríguez (Mexico)

An Introduction to the Accelerated Reliability Testing Method: A Literature Review

-J. A. Pinto-Santos, M. I. Rodríguez-Borbón, and M. A. Rodríguez-Medina (Mexico)

10:00- 10:20

Proposal of Semi Face to Face Classes for the Career of Industrial Engineer Administrator Using Technology 4.0

-I. G. G. Palomo, C. S. Peña, J. M. H. Ramos, V. L. Jiménez, and J. C. Celestino (Mexico)

Reduction of Waste in a Raw Meat Preparation and Packaging Process, by Adjusting a Continuous Improvement Methodology

-O. L. L. Cabrales, D. P. Barraza, B. E. L. Martínez, and R. P. P. Morado (Mexico)

10:20 - 10:40

BREAK

SESSION A

SESSION B

10:40 - 11:00

Using Optimization Techniques Application in Solving Smart Manufacturing Problems

-C. A. Udemba, E. Boldsaikhan, and J. P. Purswell (United States)

Simplified Simulation of Torsional Stiffness in Side Rail-Cross Member Bolted Joints

-A. R. Díaz-Echenique, B. P. Baque-Campozano, and M. Jarre-Castro (Cuba)

11:00 - 11:20

Manufacturing Plant Location Selection: A Case Study with Resilient Strategy Using AHP

-X. Zhang, Y. Zong, R. Das, S. Joshi, A. Alzu’Bi, and N. Nagarur (United States)

Microgreen Supply Chain Analysis for the Pre-Harvest Stage

-D. Wiafe and J. Talley (United States)

11:20 - 11:40

Rocket Trajectory Prediction using OpenRocket Simulator and Featherweight GPS Tracker of a Solid Propellant Rocket

-M. J. L. Caballes, M. Ajuwon, J. Bunkley, and G. Chen (United States)

Development of A Multi-Criteria Analysis Tool with a Focus on Classical, Robust Techniques and Weighting Values

-U. A. Gómez-Rivera, I. J. C. Pérez-Olguín, A. H. Alanís-Pérez, L. A. Pérez-Domínguez, and L. C. Méndez-González (Mexico)

11:40 - 12:00

Enhancing Social Community Analysis on Twitter Using Dynamic Object-Oriented and Network Analysis

-M. J. L. Caballes, A. Kazeem, and L. Bronner (United States)

Affecting Variables in E-Commerce Customer Satisfaction: Review

-P. Castillo, M. Zalapa, and E. Martínez (Mexico)

12:00 - 1:00

LUNCH

SESSION A

SESSION B

1:00 - 1:20

Assessing Consumer Compliance During Milk Contamination Events

-J. Talley, S. Thomas, T. Ogunduyilemi, and A. Nelson (United States)

Implementation of Augmented Reality Applications to Reduce Errors in the CNC Machining Process

-M. M. Méndez, E. L. R. Jardon, and L. E. M. Lopez (Mexico)

1:20 - 1:40

Failure Mode and Effect Analysis of Knitting Machines in the Textile Industry

-J. J. Cardiel-Ortega and R. Baeza-Serrato (Mexico)

Comparison of Stopping-Rule Methods in the Process Optimization Strategy Using Steepest Ascent or Descent in a Tension Measuring Machine

-P. E. García-Nava and L. A. Rodríguez-Picón (Mexico)

1:40 - 2:00

Clinical Diagnosis of Chronic Stress Using Bio-Signals Within the Framework of Industrial Revolution 4.0

-F. A. Roldan, I. J. Perez, and C. Ochoa (Mexico)